Glossary

The icon system has been developed to provide an easy and informative reference of feature to all the products offered in the Corelli Lightning Concepts range. With quality, comes great information and we hope that you will find this section very informative.

  Quick Links
 
 
C-TICK

Ctick.gif  


All products sold by Corelli Lighting Concepts comply with mandatory C-Tick Electromagnetic Compatibility (EMC) requirements.



ECO

eco.gif  

Corelli Lighting Concepts specialise in alternative lighting solutions such as LED with ultra low energy consumption, no heat output, and substantially longer lamp life.

Lighting can represent a significant portion of the energy consumption in many spaces, especially in retail and commercial applications. The heat generated also impacts on the increased energy requirements for air conditioning. In the case of LED, there is no heat and no UV or IR radiation.

Excessive heat from filament lamps can cause damage as well as personal injury. This is particularly so when lighting is installed in furniture, glass cabinets and counter displays. As 95% of energy generated from a traditional filament lamp is heat, and only 5% light, it is easy to see why such technologies such as LED are now setting the benchmark for retail lighting as well as providing a safer environment for shoppers. The drastic reduction in heat output compared to traditional lighting, means that expensive joinery will not fade or crack over time, protecting your investment.

Many specialty lighting solutions used in restaurants and gaming venues can also be very expensive to run and maintain. In the case of LED, it is also the most efficient and cost effective source for colour change lighting. Traditional colour change fittings are dreaded for the heat produced, and excessive maintenance requirements. With LED there is no heat, no moving parts and lamp life available of up to 100,000 hours.



VOLTAGE

All the LED products offered by Corelli Lighting Solutions have been designed to
comply with Australian safety requirements. It is always recommended that installation
is performed by a qualified electrical contractor.

Slide11.PNG  


All products which are powered by mains voltage are supplied with an Australian approved main voltage plug. The products are configured to operate on alternative current.

Slide13.PNG  


Products labelled as 12VDC and 24VDC are recommended to be powered by constant voltage devices to ensure maximum reliability. It is also recommended that Corelli Lighting Concepts drivers or similarly approved drivers are used in all LED installation. Please contact us for more information.

Slide14.PNG  


Products labelled as 350mA and 700mA are recommended to be powered by constant current devices to ensure maximum reliability. It is also recommended that Corelli Lighting Concepts drivers or similarly approved drivers are used in all LED installation. Please contact us for further information on this issue.



CONTROL

Slide16.PNG  

Dimming of most products offered by Corelli Lighting Concepts is achieved through phase width modulation. A range of PWM dimmers and interfaces for C-Bus and Dynalite control are also available. Please contact us for more information. It is always recommended that installation is performed by a qualified electrical contractor.

 

control.gif  

A range of DMX colour controllers is also offered by Corelli Lighting Concepts. These can also be interfaced with control systems such as C-Bus and Dynalite. We also offer a arrange of dedicated colour controllers to suit almost any individual requirements. It is always recommended that installation is performed by a qualified electrical contractor.



STAINLESS STEEL

steel.gif  

All products offered by Corelli Lighting Concepts are of the highest standards and are finished in a range of materials. Those available in Stainless Steel are made to exacting standards and are listed with this icon.



IP RATING

 



Protected against the entry of object larger that 12 mm square. No protected against the ingress of water.

 



Protected against the entry of object larger that 1.0 mm square.


 



Complete Protection against entry of dust. Protected against low pressure jets if water from all directions.

 



Complete Protection against entry of dust. Protected against strong jets of water.

 



Complete Protection against entry of dust. Protected against long periods of immersion under pressure.



TRAFFIC

traffic.gif  

This icon is particular to inground up light fixtures for interior and exterior use. The rating shows the recommended maximum weight bearing capacity of the product. Please contact us for more information on load and impact bearing capacities.



CUT OUT

Round Cut Out.gif  

Round Cut Out

 

Square Cut Out  

Square Cut Out.

 

 

Privacy Policy Terms & Conditions